## Starting deploy pkg operation
Deploying /tmp/vmware-root_643-3979708515/4db5ef7d/imcf-DvFnyG
Initializing deployment module. 

Cleaning old state file from tmp directory. 

EXIT STATE INPROGRESS 

Setting deploy error: Error removing lock /tmp/.vmware-deploy.INPROGRESS (No such file or directory) 

EXIT STATE Done 

Setting deploy error: Error removing lock /tmp/.vmware-deploy.Done (No such file or directory) 

EXIT STATE ERRORED 

Setting deploy error: Error removing lock /tmp/.vmware-deploy.ERRORED (No such file or directory) 

Setting deploy error: Success. 

Deploying cabinet file /tmp/vmware-root_643-3979708515/4db5ef7d/imcf-DvFnyG. 

Transitioning from state (null) to state INPROGRESS. 

ENTER STATE INPROGRESS 

Reading cabinet file /tmp/vmware-root_643-3979708515/4db5ef7d/imcf-DvFnyG. 

Flags in the header: 0

Original deployment command: /usr/bin/perl -I/tmp/.vmware/linux/deploy/scripts /tmp/.vmware/linux/deploy/scripts/Customize.pl /tmp/.vmware/linux/deploy/cust.cfg

Actual deployment command: /usr/bin/perl -I/tmp/.vmware-imgcust-dkhvtNm/scripts /tmp/.vmware-imgcust-dkhvtNm/scripts/Customize.pl /tmp/.vmware-imgcust-dkhvtNm/cust.cfg

Extracting package files. 

Check if cust.cfg exists.
cust.cfg is found in '/tmp/.vmware-imgcust-dkhvtNm' directory.
Command to exec : /usr/bin/cloud-init 

sizeof ProcessInternal is 56

Returning, pending output from stdout
Returning, pending output from stderr
Process exited normally after 0 seconds, returned 127
No more output from stdout
No more output from stderr
Customization command output: 

Customization command failed with exitcode: 127, stderr: 

cloud-init is not installed
Executing traditional GOSC workflow
Command to exec : /usr/bin/perl 

sizeof ProcessInternal is 56

Returning, pending output from stdout
Returning, pending output from stderr
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Saving output from stdout
Process exited normally after 2 seconds, returned 0
Saving output from stdout
No more output from stdout
No more output from stderr
Customization command output: INFO: Opening file name /tmp/.vmware-imgcust-dkhvtNm/cust.cfg. 
DEBUG: Processing line: '[NETWORK]' 
DEBUG: FOUND CATEGORY = NETWORK 
DEBUG: Processing line: 'NETWORKING = yes' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|NETWORKING' = 'yes' 
DEBUG: Processing line: 'BOOTPROTO = dhcp' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|BOOTPROTO' = 'dhcp' 
DEBUG: Processing line: 'HOSTNAME = VMHostDefault' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|HOSTNAME' = 'VMHostDefault' 
DEBUG: Processing line: 'DOMAINNAME = longvan.net' 
DEBUG: ADDED KEY-VAL :: 'NETWORK|DOMAINNAME' = 'longvan.net' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC-CONFIG]' 
DEBUG: FOUND CATEGORY = NIC-CONFIG 
DEBUG: Processing line: 'NICS = NIC1' 
DEBUG: ADDED KEY-VAL :: 'NIC-CONFIG|NICS' = 'NIC1' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[NIC1]' 
DEBUG: FOUND CATEGORY = NIC1 
DEBUG: Processing line: 'MACADDR = 00:50:56:b6:bd:75' 
DEBUG: ADDED KEY-VAL :: 'NIC1|MACADDR' = '00:50:56:b6:bd:75' 
DEBUG: Processing line: 'PRIMARY = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC1|PRIMARY' = 'yes' 
DEBUG: Processing line: 'ONBOOT = yes' 
DEBUG: ADDED KEY-VAL :: 'NIC1|ONBOOT' = 'yes' 
DEBUG: Processing line: 'IPv4_MODE = BACKWARDS_COMPATIBLE' 
DEBUG: ADDED KEY-VAL :: 'NIC1|IPv4_MODE' = 'BACKWARDS_COMPATIBLE' 
DEBUG: Processing line: 'BOOTPROTO = static' 
DEBUG: ADDED KEY-VAL :: 'NIC1|BOOTPROTO' = 'static' 
DEBUG: Processing line: 'IPADDR = 103.48.194.31' 
DEBUG: ADDED KEY-VAL :: 'NIC1|IPADDR' = '103.48.194.31' 
DEBUG: Processing line: 'NETMASK = 255.255.255.192' 
DEBUG: ADDED KEY-VAL :: 'NIC1|NETMASK' = '255.255.255.192' 
DEBUG: Processing line: 'GATEWAY = 103.48.194.1' 
DEBUG: ADDED KEY-VAL :: 'NIC1|GATEWAY' = '103.48.194.1' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[DNS]' 
DEBUG: FOUND CATEGORY = DNS 
DEBUG: Processing line: 'DNSFROMDHCP=no' 
DEBUG: ADDED KEY-VAL :: 'DNS|DNSFROMDHCP' = 'no' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: 'NAMESERVER|1 = 103.237.144.60' 
DEBUG: ADDED KEY-VAL :: 'DNS|NAMESERVER|1' = '103.237.144.60' 
DEBUG: Processing line: 'NAMESERVER|2 = 103.27.236.70' 
DEBUG: ADDED KEY-VAL :: 'DNS|NAMESERVER|2' = '103.27.236.70' 
DEBUG: Processing line: '' 
DEBUG: Empty line. Ignored. 
DEBUG: Processing line: '[DATETIME]' 
DEBUG: FOUND CATEGORY = DATETIME 
DEBUG: Processing line: 'TIMEZONE = Asia/Ho_Chi_Minh' 
DEBUG: ADDED KEY-VAL :: 'DATETIME|TIMEZONE' = 'Asia/Ho_Chi_Minh' 
DEBUG: Processing line: 'UTC = yes' 
DEBUG: ADDED KEY-VAL :: 'DATETIME|UTC' = 'yes' 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading /etc/os-release file ...  
DEBUG: opening file /etc/os-release. 
DEBUG: Match found   : Line = PRETTY_NAME="CentOS Linux 7 (Core)"
 
DEBUG: Actual String : "CentOS Linux 7 (Core)" 
DEBUG: "CentOS Linux 7 (Core)" 
WARNING: Amazon Linux flavor not detected 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: CentOS Linux release 7.5.1804 (Core) 
 
DEBUG: Exit Code: 0 
DEBUG: CentOS Linux release 7.5.1804 (Core) 
 
DEBUG: Detected flavor: 'CentOS 7' 
INFO: Detected distribution: CentOS 7 
DEBUG: Reading issue file ...  
DEBUG: Command: 'cat /etc/issue' 
DEBUG: Result: \S
Kernel \r on an \m

 
DEBUG: Exit Code: 0 
DEBUG: \S
Kernel \r on an \m

 
DEBUG: Reading redhat-release file ...  
DEBUG: Command: 'cat /etc/redhat-release' 
DEBUG: Result: CentOS Linux release 7.5.1804 (Core) 
 
DEBUG: Exit Code: 0 
DEBUG: CentOS Linux release 7.5.1804 (Core) 
 
DEBUG: Detected flavor: 'CentOS 7' 
INFO: Detected distribution flavour: CentOS 7 
INFO: Checking if can run 'Customize' workflow 
INFO: Calling 'Customize' method 
DEBUG: Command: 'hostname 2>/dev/null' 
DEBUG: Result: CENTOS75
 
DEBUG: Exit Code: 0 
DEBUG: TimedCommand: 'hostname -f 2>/dev/null' with timeout of 5 sec 
DEBUG: Fetching result from /tmp/timed_out_tmp_file_669 
DEBUG: TimedResult: CENTOS75
 
INFO: OLD HOST NAME = CENTOS75 
INFO: Marker file exists or is undefined, pre-customization is not needed 
INFO: Customizing Network settings ...  
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-lo. 
DEBUG: DHCPV6C is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-lo. 
DEBUG: DHCPV6C_OPTIONS is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-lo. 
DEBUG: IPV6_AUTOCONF is '' 
DEBUG: opening file /etc/sysconfig/network-scripts/ifcfg-lo. 
DEBUG: IPV6INIT is '' 
INFO: Removing old interface configuration files. 
DEBUG: Command: 'rm -f /etc/sysconfig/network-scripts/ifcfg-eth*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Erasing DHCP leases 
DEBUG: Command: 'pkill dhclient' 
DEBUG: Result:  
DEBUG: Exit Code: 256 
DEBUG: Command: 'rm -f /var/lib/dhcp/*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'rm -f /var/lib/dhclient/*' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Resetting Network Administration Tool (redhat-config-network) 
DEBUG: Command: 'rm -rf /etc/sysconfig/networking/devices' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'rm -rf /etc/sysconfig/networking/profiles' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Primary NIC is 00:50:56:b6:bd:75 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens192: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:50:56:b6:bd:75 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
DEBUG: opening file /etc/sysconfig/network. 
DEBUG: Line : # Created by anaconda
 
INFO: GATEWAYDEV not found, created with ens192 
INFO: GATEWAY not found 
INFO: Created with 103.48.194.1 
DEBUG: opening file for writing (/etc/sysconfig/network). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'hostname VMHostDefault' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/hostname). 
DEBUG: Command: 'chmod 644 /etc/hostname' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Customizing NICS ...  
DEBUG: Command: 'modprobe pcnet32 2> /dev/null' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: '/sbin/ifconfig eth0 2> /dev/null' 
DEBUG: Result:  
DEBUG: Exit Code: 32512 
INFO: Customizing NICS. { NIC1 } 
INFO: Customizing NIC NIC1 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens192: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:50:56:b6:bd:75 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
DEBUG: Deleting 0 files... 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens192: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:50:56:b6:bd:75 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
INFO: Writing ifcfg file for NIC suffix = ens192 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 1 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^NIC1(\|IPv6GATEWAY\|) 
INFO: Query config for ^(NIC1\|IPv6ADDR\|) 
INFO: Query config for ^(NIC1\|IPv6NETMASK\|) 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens192: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:50:56:b6:bd:75 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/sysconfig/network-scripts/ifcfg-ens192). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/network-scripts/ifcfg-ens192' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^NIC1(\|IPv6GATEWAY\|) 
INFO: Customizing Hosts file ...  
DEBUG: Old hostname=[CENTOS75] 
DEBUG: Old FQDN=[CENTOS75] 
DEBUG: New hostname=[VMHostDefault] 
DEBUG: Building FQDN. HostnameFQDN: VMHostDefault, Domainname: longvan.net 
DEBUG: New FQDN=[VMHostDefault.longvan.net] 
DEBUG: opening file /etc/hosts. 
DEBUG: Line (inp): 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
 
DEBUG: Line (inp): ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
 
DEBUG: Static ip entry added 
DEBUG: Line (out): 127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
 
DEBUG: Line (out): ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
 
DEBUG: Line (out): 
103.48.194.31	VMHostDefault.longvan.net VMHostDefault
 
DEBUG: opening file for writing (/etc/hosts). 
DEBUG: Command: 'chmod 644 /etc/hosts' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Customizing DNS ...  
DEBUG: opening file /etc/nsswitch.conf. 
DEBUG: opening file for writing (/etc/nsswitch.conf). 
DEBUG: Command: 'chmod 644 /etc/nsswitch.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 1 
DEBUG: opening file for writing (/etc/resolv.conf). 
DEBUG: Command: 'chmod 644 /etc/resolv.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'whereis ip' 
DEBUG: Result: ip: /usr/sbin/ip /usr/share/man/man8/ip.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/ip addr show' 
DEBUG: Result: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens192: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 00:50:56:b6:bd:75 brd ff:ff:ff:ff:ff:ff
 
DEBUG: Exit Code: 0 
INFO: Query config for ^(DNS\|SUFFIX\|) 
INFO: Query config for ^(DNS\|NAMESERVER\|) 
DEBUG: Match Found : DNS|NAMESERVER|1 
DEBUG: 0 
DEBUG: Match Found : DNS|NAMESERVER|2 
DEBUG: 1 
DEBUG: opening file for writing (/etc/dhclient-ens192.conf). 
DEBUG: Command: 'chmod 644 /etc/dhclient-ens192.conf' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Deleting 1 files... 
DEBUG: Deleting /etc/resolv.conf.sv... 
DEBUG: Skipping the delete: file doesn't exist or is a directory 
INFO: Customizing Date&Time ...  
DEBUG: opening file /tmp/.vmware-imgcust-dkhvtNm/scripts/tzdata/backward. 
DEBUG: Command: 'ln -sf /usr/share/zoneinfo/Asia/Ho_Chi_Minh /etc/localtime' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: opening file for writing (/etc/sysconfig/clock). 
DEBUG: Command: 'chmod 644 /etc/sysconfig/clock' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
DEBUG: Command: 'whereis hwclock' 
DEBUG: Result: hwclock: /usr/sbin/hwclock /usr/share/man/man8/hwclock.8.gz
 
DEBUG: Exit Code: 0 
DEBUG: Command: '/usr/sbin/hwclock --systohc --utc' 
DEBUG: Result:  
DEBUG: Exit Code: 0 
INFO: Marker file exists or is undefined, password settings are not needed 
INFO: Marker file exists or is undefined, post-customization is not needed 
INFO: Marker creation is not needed 
INFO: Customization completed. 


Wait before set enable-nics stats in vmx.

Trying to connect network interfaces, attempt 1
Got VMX response 'queryNicsSupported'
Got VMX response 'disconnected'
Got VMX response 'connected'
The network interfaces are connected on 1 second
Transitioning from state INPROGRESS to state Done. 

ENTER STATE Done 

EXIT STATE INPROGRESS 

Deployment succeeded. 

Launching cleanup. 

Command to exec : /bin/rm 

sizeof ProcessInternal is 56

Returning, pending output from stdout
Returning, pending output from stderr
Process exited normally after 0 seconds, returned 0
No more output from stdout
No more output from stderr
Customization command output: 

sSkipReboot: false, forceSkipReboot false

Ran DeployPkg_DeployPackageFromFile successfully
## Closing log
Rebooting

Command to exec : /sbin/telinit 

sizeof ProcessInternal is 56

Returning, pending output from stdout
Returning, pending output from stderr
Process exited abnormally after 0 sec, uncaught signal 15
No more output from stdout
No more output from stderr
Customization command output: 

Customization command failed with exitcode: 127, stderr: 

telinit returned error 127